HOW TO CLOSE YOUR WATER MAIN: STEP-BY-STEP GUIDE

How to Close Your Water Main: Step-by-Step Guide

How to Close Your Water Main: Step-by-Step Guide

Blog Article

Book My Estimate

We've unearthed this great article relating to How to Locate & Turn Off Main Water Shut-Off Valves below on the web and decided it made good sense to discuss it with you in this article.


How to Turn off the Water for Plumbing Repairs
One of the most typical areas a water main will be located in house is in your boiler room, cellar, or a cut out panel in an area for your home.
When you find the water main you will just turn the shutoff clockwise to close all the water off in your home till you have finished the repair. Some residences will certainly have a ball valve with a lever that you can pull rather than resort to shut the water off.
If you try to shut the water off to your components by utilizing an angle quit which does not work you will need to shut of the water pipe to make your repair. There are likewise many other reasons you could require to shut the water pipe like repairing icy pipelines, fixing leakages, replacing components or taps.
Lots of people are not conscious that they even have a water pipe shutoff right in their very own residence and just call a plumber of never ever end up doing the repair service till points get truly negative since they just do not know that closing the water pipe is really very easy.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Find and Shut Off Main Water Shutoff Valve

I came across that entry about How to Locate & Turn Off Main Water Shut-Off Valves while doing a lookup on the search engines. Those who appreciated our post if you please don't forget to pass it around. Thank-you for your time invested reading it.


Tailored emergency solutions; call now.

Report this page